Olympus Stylus TG-Tracker - Connecting to a smartphone

39 EN
Connecting to a smartphone
1
Start the OI.Share App installed on your smartphone.
• You can also connect to smartphones using OI.Track.
2
Highlight [Wi-Fi] (P. 36) in the SETUP menu and press OK.
3
Highlight [Start] and press OK.
• You can also initiate the connection by pressing and holding M.
4
The QR code displayed in the camera
monitor can be read using the app
launched on the smartphone.
• A connection is established automatically and
the camera indicator lamp lights blue.
WWWWWWWWWWWWW
WWWWWWWWWWWWW
WWWWWWWWWWWWW
WWWWWWWWWWWWW
WWWWWWWWWWWWW
:Wi-Fi Off
MENU
:SSID
Failure of reading QR code
Enter the SSID and password in the
smartphone Wi-Fi settings app before
connecting (the SSID and password can
be viewed by pressing N in the QR code
display). See the documentation provided
with your smartphone for information on Wi-Fi
settings.
WWWWWWWWWWWWW
WWWWWWWWWWWWW
WWWWWWWWWWWWW
WWWWWWWWWWWWW
WWWWWWWWWWWWW
SSID:
:Wi-Fi Off
MENU
:QR
X-XX-XXXXXXXXX
Password:
00000000
Password
SSID
• To end the connection, press the  button of the camera.
Error message during Wi-Fi connection
Connect the camera to the smartphone again.
1 Turn off the Wi-Fi function of your smartphone.
2 Turn on the Wi-Fi function again. Select the SSID for TG-TRACKER before
another connection is made.