Selecting the camera sound
and
its volume [SOUND SETTINGS]
'.o:'~~S:S!~
~
_S9:!:!
ND_S.SIT!.t:!E~§:·=--=.=,-::=::
..
_
,_
..
_.~.';;;==-=":;:::::;=--;:;;;:;:;=:~':";.:~,,,,;.';'::"';:.:';;.::'-;.;"~.:'';
BEEP
SOUND TYPE
VOLUME
~2
OFF (No sound)/
~~Cl\ltHIGH
VOLUME
SHUTTER SOUND
SOUND TYPE
;~/2/3
-----------t-""----
----1
Selects the type and volume of the shutter
OFF (No sound)/ sound.
~Q~/HIGH
I:EJ
VOLUME
OFF (No sound)/
LgW1HIGH
OFF (No sound)/
,COW/HIGH
Adjusts the warning sound volume.
Adjusts the image playback volume.
To
turn off all sounds at once, adjust the setting from
[&
SILENT MODE] (p. 50).
Viewing the image immediately aftershooting [REG VIEW]
····::~~;:§.J;JbJg:
..
~C.Jl~.M¥-..==~
..
_._....::=::::...-=.====~::=~=~_
-;;;...._..=-::.=:=:o=-=--=
OFF
The image being recorded is not displayed. This allows the user to prepare for the next
shot while following the subject
in
the monitor after shooting.
The image being recorded is displayed. This allows the user to briefly check the image
that was just taken.
Even when set to [ON], you can resume shooting while the image is being displayed.
EN
Selecting the camera sound
and
its volume [SOUND SETTINGS]
'.o:'~~S:S!~
~
_S9:!:!
ND_S.SIT!.t:!E~§:·=--=.=,-::=::
..
_
,_
..
_.~.';;;==-=":;:::::;=--;:;;;:;:;=:~':";.:~,,,,;.';'::"';:.:';;.::'-;.;"~.:'';
BEEP
SOUND TYPE
VOLUME
~2
OFF (No sound)/
~~Cl\ltHIGH
VOLUME
SHUTTER SOUND
SOUND TYPE
;~/2/3
-----------t-""----
----1
Selects the type and volume of the shutter
OFF (No sound)/ sound.
~Q~/HIGH
I:EJ
VOLUME
OFF (No sound)/
LgW1HIGH
OFF (No sound)/
,COW/HIGH
Adjusts the warning sound volume.
Adjusts the image playback volume.
To
turn off all sounds at once, adjust the setting from
[&
SILENT MODE] (p. 50).
Viewing the image immediately aftershooting [REG VIEW]
····::~~;:§.J;JbJg:
..
~C.Jl~.M¥-..==~
..
_._....::=::::...-=.====~::=~=~_
-;;;...._..=-::.=:=:o=-=--=
OFF
The image being recorded is not displayed. This allows the user to prepare for the next
shot while following the subject
in
the monitor after shooting.
The image being recorded is displayed. This allows the user to briefly check the image
that was just taken.
Even when set to [ON], you can resume shooting while the image is being displayed.
EN
To Next Page
Loading...
