Olympus STYLUS TOUGH-8000 - Page 45

Adjust the settings for the functions while referring to "Using the Menu" (p. 3).
Resetting the file name numbers of
pictures {FILE NAME]
_J~:.SE.I;!dg~ El~SN~E..._·c===~
tt
Month: 1 to C
(A=October,
p, B=November,
. C=December)
Day:
01 to 31
Folder name
DCIM
Folder name
LYMP
Automatic
numbering
File name
.jpg
Automatic
numbering
Adjusting the CCD and adjusting the
image processing function
{PIXEL MAPPING]
~ ~ SE.TUP. It P.J2<ELMAePJNG~ .... . ,_ # ••
.. _---..~_,_~ .. _,'""_."'_,-l<""''''''''' . ...,..~,.''''' ... ''-_ .,.".,.__ '....-...., ,.~.+>'...,.".,." .... ,, __ ._
This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended.
CD For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping.
If the camera is
turned
off during pixel mapping, be sure to
perform it again.
To adjust the CCO and the image
processing function
Press the @ button when [START]
(Submenu 2) is displayed.
• The camera checks and adjusts the ceo and the
image processing function at the same time.
AUTO
This resets the sequential number
for the folder name and file name
whenever a new card is inserted.
'I
This is useful when grouping
images on separate cards.
Even when a new card is inserted,
this continues the numbering for
the folder name and file name from
the previous card. This is useful for
managing all image folder names
and files names with sequential
numbers.
'1 The number for the folder name is reset to 100, and
the one for the file name is reset to 0001.
EN
Adjust the settings for the functions while referring to "Using the Menu" (p. 3).
Resetting the file name numbers of
pictures {FILE NAME]
_J~:.SE.I;!dg~ El~SN~E..._·c===~
tt
Month: 1 to C
(A=October,
p, B=November,
. C=December)
Day:
01 to 31
Folder name
DCIM
Folder name
LYMP
Automatic
numbering
File name
.jpg
Automatic
numbering
Adjusting the CCD and adjusting the
image processing function
{PIXEL MAPPING]
~ ~ SE.TUP. It P.J2<ELMAePJNG~ .... . ,_ # ••
.. _---..~_,_~ .. _,'""_."'_,-l<""''''''''' . ...,..~,.''''' ... ''-_ .,.".,.__ '....-...., ,.~.+>'...,.".,." .... ,, __ ._
This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended.
CD For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping.
If the camera is
turned
off during pixel mapping, be sure to
perform it again.
To adjust the CCO and the image
processing function
Press the @ button when [START]
(Submenu 2) is displayed.
• The camera checks and adjusts the ceo and the
image processing function at the same time.
AUTO
This resets the sequential number
for the folder name and file name
whenever a new card is inserted.
'I
This is useful when grouping
images on separate cards.
Even when a new card is inserted,
this continues the numbering for
the folder name and file name from
the previous card. This is useful for
managing all image folder names
and files names with sequential
numbers.
'1 The number for the folder name is reset to 100, and
the one for the file name is reset to 0001.
EN