13
Fig. 24
Fig. 25
5 Light Path Selection (SZX-TR30)
(Fig. 24)
Slide the light path selector knob @ to select the desired light path.
Light Path
Selector Knob
Indication Intensity Ratio
Pushed in
100% for binocular eyepieces.
Pulled out 20% for binocular eyepieces.
80% for photomicrography and TV
observation.
6 Tilt Adjustment (SZX-TBI)
(Fig. 25)
}Adjust the height and tilt of the observation tube to the most comfortable
viewing position.
Holding the binocular assembly with both hands, raise or lower it to the
desired position.
#Do not attempt to force the binocular assembly past the upper or
lower stop positions. Applying excessive force could destroy the
mechanism.
@
5 to 45°
To Next Page
Loading...
