Olympus TH4 - Remote Connector Control

9
CONTROL VIA THE REMOTE CONNECTOR
Recommended DIN 8-pin plug
· Connector type:TCP0500 Series
(mfd. by Hosiden Electronics Co., Ltd.)
DIN 8-pin connector
specifications
Pin No. Name
Analog input for light intensity control
Remote ON/OFF - H
Vcc (13.5 V) input
Analog input for light intensity control
using external VR - GND
Vcc (13.5 V) output
Detection of failed lamp
@
²
³
|
ƒ
…
†
# Be sure not to make a mis-
take with the connections.
# Input voltage rating: 4.75 to
5.25 V.
+5 V output