Olympus THUNDERBEAT ESG-400 - Table of Contents

SECTION 1: THUNDERBEAT & SONICBEAT PREPARATION
THUNDERBEAT/SONICBEAT System Components .............................................3
Connecting the Communication Cable ..............................................................4
THUNDERBEAT Footswitch (Optional) ................................................................ 5
SONICBEAT Footswitch (Optional) .....................................................................6
Powering ON ...................................................................................................7
THUNDERBEAT/SONICBEAT Assembly ..............................................................9
Connecting THUNDERBEAT Transducer ........................................................... 11
Connecting SONICBEAT Transducer ................................................................ 12
THUNDERBEAT & SONICBEAT Probe Check ....................................................13
THUNDERBEAT Settings ................................................................................. 15
SONICBEAT Settings ......................................................................................16
ESG-400 Components ...................................................................................17
Connecting the Footswitch .............................................................................18
Socket Guide ................................................................................................. 19
Assigning a Footswitch ..................................................................................25
ESG-400 Mode Cross Reference .................................................................... 26
Setting the Output: Cut & Coag Modes ...........................................................27
Save Energy Output Settings as a Procedure ..................................................28
Select Procedure ...........................................................................................29
Delete Saved Procedure ................................................................................. 30
Common USG-400 Errors ..............................................................................31
USG-400 Troubleshooting ..............................................................................40
ESG-400 Troubleshooting ..............................................................................44
Disconnecting the Transducer ........................................................................49
Disposing Single-Use Items ............................................................................ 50
Compatible Reprocessing Methods.................................................................51
Transporting the Transducer ...........................................................................52
Cleaning Brushes & Detergents ...................................................................... 53
Manual Cleaning ...........................................................................................54
Sterilization ...................................................................................................55
Storage .........................................................................................................56
Table of Contents
SECTION 1: THUNDERBEAT & SONICBEAT PREPARATION
SECTION 2: ESG-400 PREPARATION AND OPERATION
SECTION 3: TROUBLESHOOTING
SECTION 4: TRANSDUCER REPROCESSING
NOTE: This Quick Reference Guide is only a summary of the THUNDERBEAT Instructions for Use.
For detailed operating instructions, be sure to follow the Instruction Manual that was included with
your THUNDERBEAT when purchased.