EN-4 Vanta — Getting Started Guide
To Power On the Analyzer
The power button DOES NOT turn on the X-ray tube. Tube power cannot be supplied until the
analyzer software is launched.
1. Press the power button ( ) to turn on the analyzer.
The Vanta user interface starts up with the Welcome screen displayed.
2. Read the radiation safety notice.
3. In the password area (four blank boxes), tap the leftmost box to display the keypad.
4. Enter the password to confirm that you are a certified user.
To Power Off the Analyzer
1. Press and hold the power button ( ) for one second.
2. In the Welcome screen, tap SHUT DOWN.
OR
Press and hold the power button until the touch screen turns off.
Battery Precautions
• Before disposing of a battery, check your local laws, rules, and regulations, and follow them
accordingly.
To Next Page
Loading...
