Olympus 45MG User Manual

DMTA-10022-01EN — Rev. C
January 2015
45MG
Ultrasonic Thickness Gage
User’s Manual
This instruction manual contains essential information on how to use this Olympus product safely and effectively.
Before using this product, thoroughly review this instruction manual. Use the product as instructed.
Keep this instruction manual in a safe, accessible location.

Olympus 45MG Specifications

General

Brand	Olympus
Model	45MG
Type	Ultrasonic Thickness Gauge
Units	mm, inches
Measurement Range	0.08 to 635 mm
Operating Temperature	-10°C to 50°C
Power Supply	2 AA batteries
Resolution	0.01 mm
Dimensions	32 mm

Summary

Important Information — Please Read Before Use

Intended Use

Specifies the 45MG's intended purpose for measuring industrial material thickness.

Battery Precautions

Details safe handling, disposal, and storage of batteries to prevent hazards.

1. Instrument Description

1.1 Product Description

Describes the 45MG ultrasonic thickness gage and its key capabilities.

1.5 Keypad Functions

Explains the primary and secondary functions of the instrument's keypads.

2. Powering the 45MG

2.2.3 Replacing the Batteries

Provides a step-by-step guide for replacing the instrument's AA batteries.

4. Initial Setup

4.1 Setting the User Interface Language and Other System Options

5. Basic Operation

5.1 Setting Up the Transducer

5.2 Calibration

6. Software Options

6.2 Echo Detection Modes with Dual Element Transducers

6.7 Datalogger Option

7. Using Special Functions

7.1 Activating and Configuring a Differential Mode

7.5 Locking the Instrument

8. Configuring the Instrument

8.1 Configuring Measurement Parameters

9. Using Advanced Gaging Features

9.3 B-Scan

10. Custom Setups for Single Element Transducers

10.1 Creating a Custom Setup for a Single Element Transducer

11. Managing Communications and Data Transfer

11.2 Setting Up USB Communication

11.3.1 Exporting a File to the Memory Card (Datalogger Option Only)

12. Maintaining and Troubleshooting the 45MG

12.5 Performing Hardware Diagnostic Tests

12.10 Resolving Measurement Problems