DMTA-10022-01EN, Rev. C, January 2015
Chapter 3
38
3.3 Parameter Screens
The 45MG parameters are logically grouped in parameter screens that can be accessed
using front panel keys or menu commands. Figure 3-8 on page 38 shows the MEAS
parameter screen as an example.
Figure 3-8 Parameter screen example
The title bar, located at the top of the parameter screen, indicates the parameter
subject. When you access a parameter screen from a menu, a menu button appears on
the left side of the title bar. This menu button can be used to easily return to the
original menu. One or two help text bars appear at the bottom of the screen to indicate
the keys required to select a parameter and edit its value.
To select a parameter and edit its value
1. Use the [] and [] keys to highlight the desired parameter.
2. For parameters with predefined values, use the [] and [] keys to select the
desired value.
3. In parameter screens containing lists or alphanumeric parameters:
• In a list, use the [] and [] keys to highlight the desired list item.
• For an alphanumeric parameter, use the [] and [] keys to enter the desired
characters (see “Selecting the Text Edit Mode” on page 39 for details).
•Press [2nd F], [] or [2nd F], [] to leave a list or alphanumeric parameter,
and proceed to the next or previous screen element.
4. To exit the parameter screen, press [MEAS] to return to the measurement screen.
Help text bars
Parameters
Title bar
Menu from which the
screen is accessed
To Next Page
Loading...
