DMTA-10022-01EN, Rev. C, January 2015
Maintaining and Troubleshooting the 45MG
207
2. In the SP MENU (see Figure 4-2 on page 45), select STATUS (see Figure 12-5 on
page 207).
Figure 12-5 Example of the STATUS screen
3. Press [MEAS] to return to the measurement screen.
12.8 Understanding Error Messages
When operating the gage, certain error messages may appear. These messages usually
indicate a problem with the operating procedure, but certain messages might indicate
a physical problem with the gage itself. If you do not understand an error message,
contact Olympus for assistance.
12.9 Resolving Battery Problems
The power indicator (in the upper-left corner of the display) contains bars that
indicate the percentage of remaining battery charge level. When the charge level
becomes low, the gage automatically turns off. If the gage turns off immediately after
you turn it on, or if you are unable to turn it on, the batteries are probably depleted.
Replace the batteries with three new AA-size batteries.
To Next Page
Loading...
