Olympus 45MG - Figure 11-3 Example of the IMPORT Screen

DMTA-10022-01EN, Rev. C, January 2015
Managing Communications and Data Transfer 191
To import survey files from the external memory card
1. Ensure that the \OlympusNDT\45MG\Transfer folder on your external microSD
memory card contains the file you want to import into the 45MG’s internal
memory.
2. Insert the microSD memory card into its designated slot under the battery door of
the 45MG (see Figure 1-4 on page 21).
3. If you inserted the microSD memory card while the 45MG was turned on, turn the
45MG off, and then back on so that it recognizes the presence of the memory card.
4. In the measurement screen, press [FILE], and then select IMPORT.
5. In the IMPORT screen (see Figure 11-3 on page 191):
a) Select the file to be imported into the list of available files.
The listed files are those found in the \OlympusNDT\45MG\Transfer folder
on the external microSD memory card.
b) Select IMPORT.
c) When a file with the same name already exists in the 45MG, the Overwrite
existing file? message appears. When you still want to import the file, select
YES.
A beep confirms the end of the file transfer and the instrument returns to the
measurement screen.
Figure 11-3 Example of the IMPORT screen