Olympus 45MG Getting Started Guide

45MG — Getting Started Guide 1
Intended Use
The 45MG is designed to measure thicknesses of industrial and commercial materials. Do not use the
45MG for any purpose other than its intended use.
Instruction Manual
Before use, thoroughly review the 45MG User’s Manual (P/N: DMTA-10022-01EN), and use the
product as instructed. The User’s Manual contains essential information on how to use this Olympus
product safely and effectively. The 45MG User’s Manual is available on the documentation CD (P/N:
45MG-MAN-CD [U8147024]) that is shipped with the 45MG, or can be downloaded at
www.olympus-ims.com. Keep the documentation CD in a safe, accessible location.
Safety Signal Words
Indicates an imminently hazardous situation calling attention to a procedure, practice, or the like,
which, if not correctly performed or adhered to, could result in death or serious personal injury.
Indicates a potentially hazardous situation calling attention to a procedure, practice, or the like, which,
if not correctly performed or adhered to, could result in death or serious personal injury.
Indicates a potentially hazardous situation calling attention to a procedure, practice, or the like, which,
if not correctly performed or adhered to, could result in minor or moderate personal injury, material
damage, particularly to the product, destruction of part or all of the product, or loss of data.
45MG
Getting Started Guide

Olympus 45MG Specifications

General

Brand	Olympus
Model	45MG
Type	Ultrasonic Thickness Gauge
Units	mm, inches
Measurement Range	0.08 to 635 mm
Operating Temperature	-10°C to 50°C
Power Supply	2 AA batteries
Resolution	0.01 mm
Dimensions	32 mm