Olympus VH-520 - Language and Time Settings; Changing Display Language; Setting Date and Time

38
EN
Changing the display language
Changing the display language
d
d
[
[
l
l
]
]
Submenu 2 Application
Languages
The language for the menus and
error messages displayed on the
monitor is selected.
Setting the date and time
Setting the date and time
d
d
[
[
X
X
]
]
1 Press the Arrow pad to FG to select the year for
[Y].
2 Press the Arrow pad to I to save the setting for
[Y].
3 As in Steps 1 and 2, press the Arrow pad to
FGHI to set [M] (month), [D] (day), [Time]
(hours and minutes), and [Y/M/D] (date order),
and then press the A button.
● For precise time setting, press the A button as the
time signal strikes 00 seconds.
Choosing home and alternate time
Choosing home and alternate time
zones
zones
d
d
[World Time]
[World Time]
● You will not be able to select a time zone using
[World Time] if the camera clock has not fi rst been
set using [X].
Submenu 2 Submenu 3 Application
Home/
Alternate
x
The time in the home
time zone (the time
zone selected for x
in submenu 2).
z
The time in the travel
destination time
zone (the time zone
selected for z in
submenu 2).
x
*1
—
Select the home time
zone (x).
z
*1, 2
—
Select the travel
destination time zone
(z).
*1
In areas where daylight saving time is in effect, use
FG to turn daylight saving time ([Summer]) on.
*2
When you select a time zone, the camera
automatically calculates the time difference
between the selected zone and the home
time zone (x) to display the time in the travel
destination time zone (z).