Olympus XZ-2 - Page 36

36 EN
Frequently-used options/Customizing camera settings
3
Reducing camera shake (image stabilizer)
You can reduce the amount of camera shake that can occur when shooting in low light
situations or shooting with high magnifi cation.
1
Display the live control and select the image
stabilizer item using FG.
L
F
4:3
P
WB
AUTO
WBWBWB
AUTOAUTOAUTO
HD
Auto
i
2
Select an option with HI and press Q.
Still image
OFF IS Off Image stabilizer is off.
IS1 Auto Image stabilizer is on.
IS2 Vertical IS
Image stabilization applies only to vertical
(Y) camera shake. Use when panning the
camera horizontally.
IS3 Horizontal IS
Image stabilization applies only to horizontal
(Z) camera shake. Use when panning the
camera horizontally with the camera held in
portrait orientation.
# Cautions
• The image stabilizer cannot correct excessive camera shake or camera shake that occurs
when the shutter speed is set to the slowest speed. In these cases, it is recommended
that you use a tripod.
• When using a tripod, set [Image Stabilizer] to [Off].