Olympus XZ-2 - Page 61

61 EN
Frequently-used options/Customizing camera settings
3
V Exp/p/ISO
MENU
c
V
Option Description
g
Metering Choose a metering mode according to the scene. 42
P+Metering
If [On] is selected, the exposure is measured using the
selected AF target.
26
Noise Reduct. This function reduces the noise that is generated during
long exposures.
[Auto]: Noise reduction is only performed at slow shutter
speeds.
[On]: Noise reduction is performed with every shot.
[Off]: Noise reduction off.
• Noise reduction requires about twice the time needed to
record the image.
• Noise reduction turns off automatically during sequential
shooting.
• This function may not work effectively with some shooting
conditions or subjects.
18
Noise Filter Choose the amount of noise reduction performed at high
ISO sensitivities.
—
ISO Set ISO sensitivity. 44
ISO-Auto Set Choose the upper limit and default value used for ISO
sensitivity when [Auto] is selected for [ISO].
[High Limit]: Choose the upper limit for auto ISO sensitivity
selection.
[Default]: Choose the default value for auto ISO sensitivity
selection.
—
Bulb Timer You can set the maximum time for bulb shooting. 18
W #Custom
MENU
c
W
Option Description
g
# Slow Limit
Choose the slowest shutter speed available when a fl ash is
used.
24
w+F
When set to [On], it will be added to the exposure
compensation value and fl ash intensity control will be
performed.
—
X K/Color/WB
MENU
c
X
Option Description
g
WB Choose the white balance mode. 38
All >
[All Set]: Use the same white balance compensation in all
modes except [CWB].
[All Reset]: Set white balance compensation for all modes
except [CWB] to 0.
—
W Keep Warm
Color
Select [Off] to eliminate “warm” colors from pictures taken
under incandescent lighting.
—
#+WB
Adjust white balance for use with a fl ash.
—
Color Space You can select how colors are reproduced on the monitor or
printer.
—