64
EN
Frequently-used options/Customizing camera settings
3
b
K
Utility
MENU
c
b
Option Description
g
Pixel Mapping The pixel mapping feature allows the camera to check
and adjust the image pickup device and image processing
functions.
83
Exposure Shift Adjust optimal exposure separately for each metering mode.
• This reduces the number of exposure compensation
options available in the selected direction.
• The effects are not visible in the monitor. To make
normal adjustments to the exposure, perform exposure
compensation (P. 23).
—
Level Adjust Adjust the angle of the virtual horizon.
[Reset]: Restore the factory default angle.
[Adjust]: Set the virtual horizon to the camera’s current
angle.
—
Touch Screen
Settings
Activate the touch screen. Choose [Off] to disable the touch
screen.
33
Eye-Fi* Enable or disable upload when using an Eye-Fi card. 84
m/ft When [AF Mode] (P. 43) is set to [MF], you can select meters
or feet as the unit of length displayed on the monitor.
—
EVF Adjust Adjust the brightness and
color temperature of the
electronic viewfi nder (sold
separately). The selected
color temperature is also
used in the monitor during
playback. Use HI to select
color temperature (j) or
brightness (k) and use
FG to choose from values
between [+7] and [–7].
-
5
j
+2
k
EVF Adjust
Back
Set
—
* Use in accordance with local regulations. Onboard airplanes and in other locations in
which the use of wireless devices is prohibited, remove the Eye-Fi card from the camera
or select [Off] for [Eye-Fi].
The camera does not support the “endless” Eye-Fi mode.
To Next Page
Loading...
