Need help?Do you have a question about the Omax MD82ES10 and is the answer not in the manual?
General| Nosepiece | Revolving quadruple |
|---|---|
| Eyepieces | WF10x and WF20x |
| Objectives | 4x, 10x, 40x (spring), 100x (spring, oil) |
| Stage | Double layer mechanical stage |
| Condenser | Abbe NA1.25 condenser with iris diaphragm |
| Illumination | LED |
| Focus | Coaxial coarse and fine focus |
| Power Supply | 110V |
| Magnification | 40x to 2000x |
Steps to install eyepieces into the microscope.
Procedure for installing the color glass filter.
Instructions for optional dry darkfield condenser installation.
How to adjust the microscope's light intensity.
Steps for placing a slide on the mechanical stage.
Guide to adjusting the distance between eyepieces.
Procedure for adjusting eyepiece diopter settings.
Steps for focusing the microscope.
Instructions for applying immersion oil for 100X objective.
How to raise or lower the condenser for optimal viewing.
How to adjust the iris diaphragm for contrast and depth of field.
Steps for connecting the camera and capturing images/videos.
Refer to section 6 for dry darkfield condenser observation.
Steps to mount the dry darkfield condenser.
Procedure to center the dry darkfield condenser.
To Next Page
