17
Operation
STORING PRODUCT INSIDE COOLER
• If a oor shelf is included (Type A, B, C, D), place it directly inside cooler, and right after that, place shelves
(Type E, F, G), using metallic clips (make sure they are aligned at the same height). If a oor shelf is not
included use clips to place a shelf.
• If the cooler has a plastic rack included, it includes supports for each grill, without using metal clip.
• If the cooler has been turned o and it is necessary to turn it on, wait for at least one hour to cool the
interior of the cooler before introducing product.
• When the cooler is lled up, arrange and order product inside; do not throw or drop product when placing it
inside as that action will damage.
Airow inside cabinet is priority for the cooler, thus make sure that:
• Product does not exert pressure on internal walls and it does not go beyond perimeter or grill limits.
• Avoid introducing containers inside closed boxes, such as carton board, trays, bags or plastic covers.
• If your cooler has a bin and fan avoid placing product and other objects against, or in a way that obstructs,
fan air outlets.
IMPORTANT
Some models are designed to cool products (i.e. beer), under 0°C. Do not use this type of cooler for other
products that may be quality-aected due to these low temperatures. Some products freeze when subjected to
these temperatures and the containers may explode. If product containers are made of glass, they may cause
cuts and serious wounds to you; thus, always follow recommendations and instructions from your supplier. Do
not introduce unauthorized containers or product or, ask the Service Center for further details.
It is recommended that before closing your business, ll up your cooler so that on the next day you have cold
product available for your customers; doing so will contribute to energy saving due to the fact that doors will be
kept closed overnight and cooling will be more ecient.
IMPORTANT: horizontal shelf maximum load must not exceed equivalent weight of three can trays of
355ml (12oz).
TEMPERATURE CONTROL
All temperature controls are electronic and are previously congured by manufacturer. Thanks to this
technology, neither height nor exterior temperature aect the interior environment, thus, no adjustments are
necessary.
Your cooler may include one of these controls:
• CIF: Intelligent Control Function.
• ETC1H: Electronic Controller.
The temperature control display is usually located on the plastic front grill.
In the case of ETC1H control, it is located on the condenser unit. It is protected by the front plastic grill. In
smaller coolers, ETC1H is located on the back of cooler. It does not have a display.
To Next Page
Loading...
Need help?
General
