18
Operation
If your cooler has a Intelligent Control Function (CIF), follow the instructions
attached to cooler for further detail.
Each CIF has its own cooling conguration. It may also include energy savings
modes and it may transmit information to your suppliers. Energy savings modes may
be activated with the display button or automatically when the cooler is not in use.
In case of coolers without door, although some versions have CIF, they don’t include
the savings mode due to lack of a door; however, you must use the night curtain
just before closing your business to reduce energy consumption and to allow
compressors to rest.
If the cooler includes an EMS controller, it will also be precongured. It analyzes
temperatures inside and outside the cooler for better cooling of product.
Temperatures and alarms are shown on integrated display.
The ERC controller is precongurated and allows the user to set the right
temperature for the product. It includes inner temperature sensor and also has
sensors for the refrigeration and lighting system that allow a better performance.
The LAE control is precongured, allowing user to select an adequate temperature for dierent products.
Alarms are shown on the display. It also includes an automatic deicing mode, manual deicing, and lighting
control.
IMPORTANT: if the cooler has a temperature control issue or, if failure alarms occur on CIF, EMS, LAE
or ERC displays, never attempt to make control adjustments; please call the Customer Service Center.
You will be assisted by experienced and authorized personnel.
The ETC1H control in some models is also precongured by the manufacturer to maintain product
temperature. It does not include a display that shows temperature or alarms. If you notice malfunctioning,
please notify the Customer Service Center.
There are many CIF models to provide various solutions for multiple cooling needs for each product.
To Next Page
Loading...
Need help?
General
