16
5 Controller
The B-DRY adsorption dryer series controller in combination with tower pressure manometers
and the outlet dew-point sensor enables complete monitoring of the adsorption dryer
operation. The controller PLC includes a LCD display interface with buttons that enables the
technical expert to examine/change settings and operating parameters of the system.
Typically information such as operating mode and pressure dew point are displayed on the
main screen. Additionally the controller has a stand-by input, electronic drain control output
and alarm/warning output. Press ↓ and ↑ to move through the menu screens. Use OK to
confirm or ESC to go back.
Picture of the controller and controller housing
To Next Page
Loading...
Need help?
General
