Name: OMEGA AIR B-DRY Series
Brand: OMEGA AIR
Rating: 4 (1 reviews)

To Next Page

To Previous Page

9 Installation

9.1 General Installation Requirements

B-DRY series adsorption dryer is designed to be installed in a place that meets the following

requirements:

• Indoor installation (clean and dry)

• Non aggressive atmosphere

• Ambient temperature 1,5°C to 60°C

• Non explosive environment (Standard version DOES NOT COMPLY WITH ATEX)

• Vibration free installation (refers to floor and piping)

Compressed air which is supplied to B-DRY needs to meet the following requirements:

• Compressed air quality 2 for solid particles (if dryer is equipped with superfine

coalescing filter 0,01 µm)

• Compressed air quality 1 for solid particles (if dryer is not equipped with superfine

coalescing filter 0,01 µm)

• Compressed air quality 2 for oil (if dryer is equipped with superfine coalescing filter

0,01 µm)

• Compressed air quality 1 for oil (if dryer is not equipped with superfine coalescing filter

0,01 µm)

• Free from aggressive substances

• Free from substances which could damage adsorbent (if you are not sure about certain

substance please contact manufacturer)

• Preferably compressed air should be saturated with moisture (100% relative humidity).

Lower relative humidity can reduce efficiency.

Questions and Answers:

Need help?

Do you have a question about the OMEGA AIR B-DRY Series and is the answer not in the manual?

OMEGA AIR B-DRY Series Specifications

General