Omega CTXL-TRH-G-W8 - Using the Remote Sensor Cable - Temperature;Humidity Model; Using the Remote Sensor Cable

2.8 Using the Remote Sensor Cable - Temperature/Humidity Model
1. Connect the end of the cable with the arrow to the short cable on the sensor.
Line up the two arrows as shown in Figure 2-16 before mating the two cables.
2. Connect the other end of the remote sensor cable to the recorder.
M4098-F2-16.eps
H 35 T 2H 35 T 2
T
E
M
P
E
R
A
T
U
R
E
OM
°C
°F
RH%
32D
7D
1D
FERRITE
CORE
Figure 2-16. Using the Remote Sensor Cable
NOTE
For accurate temperature and humidity readings, the sensor
probe can be up to 12.2 m (40 ft.) away from the recorder.
Setting Up the Recorder
2
2-13