Item  Description  Function
  6  ac Power Jack   Allows the unit to be powered from ac power using the universal 
100/240 Vac adapter supplied.
  7  Membrane Keypad  Provides full access to all functions of the recorder.
  8  Backlit LCD Display   Displays temperature and relative humidity values simultaneously.
  9  Temperature/Humidity Sensor   Houses the electronic sensor which measures ambient temperature and 
relative humidity (CTXL-TRH only).
  10  Sensor Holder (clip)   Holds the temperature/humidity probe to the side of the recorder 
(CTXL-TRH only).
  11  Pen Arm and Holder (2 each)  Holds and moves the temperature and humidity pens.  
      Upper pen, Temperature or Channel 1 
      Lower pen, Humidity or Channel 2
  12  Latch Button  Releases and secures the recorder’s door.
  13  Decorative Foot Cover   Stays in place for wall-mounting the recorder. The cover must be 
removed for upright bench-top use (otherwise the recorder topples 
over)!
  14  Door Key  It locks/unlocks the chart door.
  15  “Keyhole” Slot Mounting Holes  Allows the recorder to be mounted on the wall.
  16  Carrying Slot  Allows the user to carry the recorder conveniently.
  17  Product Label  Product information label.
  18  Alarm/Relay Terminal Block   Allows the user to connect to built-in relay contacts or power external 
mechanical relays.
  19  Battery Compartment   Holds 4 “D” size batteries which provide power if the ac adapter is 
not used, or provide power backup in case of ac power failure.
  20  RS232 Connection  Serial PC interface
  21  Recorder Door  It contains pen drive mechanisms. Open the door to change chart paper.
  22  Ferrite Core   Attach the snap-on Ferrite Core (included) on the Sensor Probe cable to 
minimize RF radiation emission.
  23  Thermocouples  Beaded Thermocouples with Mini-Spool Cappies.
  24  Universal TC Connector (2 each)   Allows thermocouple probes to be connected through a sub-mini or 
standard TC connector for Channel 1 and Channel 2 inputs
  25  Cable with Stripped Leads  Cable for Channel 1 and Channel 2 process input connections
  26  Process Input Connectors  6 Pin Mini DIN Connector for voltage current input 
Introduction
1
1-3