The alarm has 8 programmable features which allow it to be customized by
selecting the position of “Dip Switches” to suite many individual needs. The
following pages provide a brief explanation for each feature, and notes its factory
default setting.
Picture of Dip Switches
To Program Features:
Step 1) Power down the alarm.
Step 2) Change the position of the Dip-Switches to desired settings.
Step 3) Power up the alarm.
• =
Default Factory Setting
DIP SWITCH # 1: Internal Dual-Zone Shock Sensor
- Allows the user to turn the Internal Shock Sensor On/Off.
•Dip switch “On” = Sensor “On”
Dip switch Off = Sensor “Off”
DIP SWITCH # 2: Double Pulse Unlock:
- Sets the alarm to give 2 unlock pulses upon Disarm, for vehicles that require it.
Dip switch “On” = Double Unlock Pulses
•Dip switch Off = Single Unlock Pulse
Page 10
Programmable Features
How to Program Features
To Next Page
Loading...
