Omega OBO960X - Oven Function Control; Oven Thermostat Control; Oven Timer Control

11
Operating Instructions
OVEN FUNCTION CONTROL
The oven function control is used to select the different functions. Each is explained in detail
further in the manual. To select a function, turn the control knob to the desired oven function and
then set the temperature with the thermostat control.
OVEN THERMOSTAT CONTROL
The oven thermostat control is used to select the desired temperature for cooking. When the
temperature inside your oven reaches the value set, the thermostat will cut the circuit and the
thermostat light will go off. When the temperature falls below the set value, the thermostat will
again be turned on alongside the thermostat light. It is normal for this to occur during the cooking
process, particularly when the door has been opened.
OVEN TIMER CONTROL
The 3-button timer is situated in the centre of the control panel.
OVEN STATUS ICON.
If on, oven is ready for cooking, or is cooking. If off, the oven is not cooking.
MINUTE MINDER ICON.
If on, the Minute Minder is running. If flashing, the minute minder can be adjusted using
the minus & plus buttons. If off, the Minute Minder is not active.
CHILD LOCK ICON.
If on, the Child Lock is active. If off, the Child Lock is not active.
AUTOMATIC COOKING ICON.
If on, a timer function is running. If flashing, a timer function has completed or power
has been reset. If off, no timer function is running.