5 
 
 
TECHNICAL DATA 
220-240V AC/380-415V AC 50/60 Hz 
 
Burner 
Specifications 
Gas Natural 
1.00kPa 
ULPG 
2.75kPa 
Wok Burner 
Injector  1.60  mm  Injector  0.92  mm 
Gas flow  0.318  m³/h  Gas flow  242  g/h 
Power  12.00  MJ/h  Power  12.00  MJ/h 
Rapid Burner 
Injector  1.55  mm  Injector  0.90  mm 
Gas flow  0.318  m³/h  Gas flow  211.7  g/h 
Power  11.00  MJ/h  Power  11.00  MJ/h 
Semi-Rapid Burner 
Injector  1.20  mm  Injector  0.70  mm 
Gas flow  0.185  m³/h  Gas flow  141  g/h 
Power  7.00  MJ/h  Power  7.00  MJ/h 
Auxiliary Burner 
Injector  0.90  mm  Injector  0.50  mm 
Gas flow  1.00  m³/h  Gas flow  76.3  g/h 
Power  3.80  MJ/h  Power  3.30  MJ/h 
Note: Diameter values written on the injector are specified without a decimal point. For example; a diameter of 
“1.70 mm” is specified as “170” on the injector.