Tension adjustment
of the door spring
【】Figure5
Tension adjustment of the door spring
●
Connection of drain hoses
●
The door springs are set at the factory to the proper tension for the outer door.
If a est heti c woo den pa ne l are ins tall ed, you wi ll ha ve to ad just the do o r s pring t ens ion.
Rotate the adjusting screw to drive the adjustor to strain or relax the steel cable
(see figure 5).
D oo r sp ri ng te nsi on is c o rre ct wh en
the door remains horizontal in the
fully o pened position yet rises
toaclosewiththeslightliftofa
finger.
，
Insert th e drain h ose into a dr ain pipe with a m inimum diameter of 4 0mm, or let i t run into the sink, ma king sur e t o
avoid bending or crimping it. The topof the ho semust belessthan 1000mm.
A
Counter
Front
Drain pipe
NOTE
The top of the hose
must be less than
1000mm.
φ 40mm
B
To Next Page
Loading...
