Product User Guide | 8
OM-CP-OCTPRO
USER INTERFACE
Measurement Setup
When the user selects a Measurement Parameter, the device will display the relevant options for that selection. Example shown are the
Voltage options.
Select Channel Configuration Select Measurement ParameterSelect Channel Select Measurement Type
Select the Measurement button to display a pop-up
screen of relevant measurement types to choose from.
Measurement Units
When the user selects the Units button, the device will display a pop-up menu of the relevant options for that selection. Example
shown are the Voltage options.
Select Measurement ParameterSelect Channel Select Measurement Units
Engineering Units: This will be an option to set up if
the user selects the Voltage, Current or Pulse sensor (see
details below and on page 9-10).
Select Measurement Type
To Next Page
Loading...
