Omicron Lab Bode 100 - 5 Device Overview

5 Device overview
Bode 100 provides the following connectors on the front panel:
• OUTPUT (signal source output), Type: BNC jack
• INPUT CH 1 (channel 1 input), Type: BNC jack
• INPUT CH 2 (channel 2 input), Type: BNC jack
Further on a green LED is lit at the front panel when the Bode 100 is powered.
Figure 5-1: Bode 100 front view
Bode 100 provides the following connectors at the back panel:
• DC power input, Type: 5.5 mm / 2.5 mm coaxial power socket
• Ground connector, Type: 4.0 mm banana socket (available from hardware revision 2.0)
• USB connector, Type: USB A socket
Figure 5-2: Bode 100 rear view
Device overview
OMICRON Lab
11