Need help?Do you have a question about the Omicron Lab CT Analyzer and is the answer not in the manual?
General| Brand | Omicron Lab |
|---|---|
| Model | CT Analyzer |
| Category | Measuring Instruments |
| Language | English |
Details personnel requirements and safety standards for operating the CT SB2 with the CT Analyzer.
Outlines essential safety rules for operating the CT Analyzer, including disconnection and grounding.
Outlines five fundamental safety rules to be observed during operation of the CT SB2.
Provides crucial safety guidelines for operating the CT SB2, including grounding, avoiding modifications, and handling cables.
Explains the USB and RS232 interfaces for connecting the CT Analyzer to a PC and recommends USB for speed.
Provides crucial safety rules for connecting and operating the CT Analyzer, emphasizing hazard warnings.
Explains how to connect the CT Analyzer to a PC using USB or RS232 interfaces and the necessary settings.
Covers standard connection procedures for CT testing, burden, and primary resistance measurements.
Shows the basic wiring diagram for performing a CT test and outlines important connection precautions.
Illustrates the wiring setup for measuring the CT's secondary burden impedance and highlights potential measurement errors.
Provides the wiring diagram for measuring the primary winding resistance of a CT, emphasizing safety and connection details.
Describes how to measure VT ratios using the Quick Test function, including connection details and safety warnings.
Details how to perform polarity checks using Quick Test and the CPOL Polarity Checker, including wiring and procedure.
Compares 4-wire and 2-wire measurement techniques, recommending 4-wire for clamp connections to avoid errors.
Details how to prepare and configure a new CT test, including selecting test cards and entering CT name plate data.
Explains how to start the automatic test and connect the CT Analyzer, including wiring checks.
Provides important safety notes and considerations when using the Quick Test feature, including warnings about VT ratio and DC current.
Outlines the steps to perform measurements using the Quick Test feature, including selecting measurement types and starting/stopping.
Describes the Advanced measurement type offering comprehensive multimeter functionality and adjustable measurement quantities.
Provides technical specifications for the CT SB2, including mains connection, voltage, fuses, and output voltage.
Lists CE conformity requirements, EMC standards (Emission, Immunity), and certified safety standards for the CT SB2.
Addresses warnings about missing protective earth connection, emphasizing lethal voltage risks and proper grounding.
Warns about excessive reverse power, advising against disconnection and recommending waiting for power dissipation.
Defines the CT SB2 as an accessory for the CT Analyzer, intended for multi-ratio CT testing and other applications.
Explains how to establish the communication link between the CT SB2 and CT Analyzer, considering PC connectivity.
Shows the basic wiring setup for multi-ratio CT testing using the CT SB2, including tap connections.
Explains how to configure and start a multi-ratio CT test by selecting test cards and entering CT data.
Details how to use the CT-Object card to specify CT data for multi-ratio testing, including standard, P/M, I-pn, I-sn, Class, VA, and cos phi.
Explains how to use the MR-Config. card to configure multi-ratio CT tests, including setting tap numbers and combinations.
Introduces the MR-Results card for displaying measurement results for enabled tap combinations, noting it can show ratio or excitation results.
To Next Page
