Need help?Do you have a question about the Omicron Lab Bode 100 and is the answer not in the manual?
General| Brand | Omicron Lab |
|---|---|
| Model | Bode 100 |
| Category | Measuring Instruments |
| Language | English |
Outlines essential guidelines and restrictions for the proper and safe use of the Bode 100.
Lists the absolute maximum voltage and power ratings to prevent device damage.
Details the technical specifications of the Bode 100, including output, input, and interface characteristics.
Explains how to configure measurement parameters like frequency, source level, and attenuators.
Details how to configure displayed traces, including measurement type, format, and axis settings.
Introduces the two methods for measuring Gain: internal and external reference.
Explains the basic equations and concepts related to measuring Impedance, Reflection, and Admittance.
Details the Transmission/Reflection measurement mode for S-parameter analysis in the 50 Ω domain.
Explains the Gain/Phase measurement mode for determining the transfer function using external reference.
Details the One-Port measurement mode for quick impedance, admittance, and reflection measurements.
Explains the Impedance Adapter mode for measurements using B-WIC and B-SMC test fixtures.
Details the Shunt-Thru mode for measuring very small impedance values, based on S21 transmission.
Explains the Series-Thru mode for measuring very high impedance values, based on S21 transmission.
Describes the hardware setup dialog for configuring internal connections and external DUT connections.
Explains the internal calibration process to compensate for device-internal signal path drift.
Guides users through the process of performing a Gain calibration (Thru calibration) for transmission measurements.
Details the setup and procedure for calibrating transmission (S21) measurements in the Transmission/Reflection mode.
Explains the calibration setup for gain measurements in the Gain/Phase measurement mode.
Explains the Open/Short/Load calibration procedure for compensating measurement setup parasitics.
Details calibrating Impedance, Reflection, or Admittance in Transmission/Reflection or One-Port modes.
Explains calibration for Impedance/Reflection/Admittance in External Coupler or Bridge modes.
Details calibration for Impedance Adapter mode using B-WIC and B-SMC fixtures.
Covers calibration for Shunt-Thru and Series-Thru modes, enabling Thru or OSL calibration.
Explains calibration for Voltage/Current mode, allowing Thru or OSL calibration.
Details the Non-Invasive Stability Measurement (NISM) for determining phase margin.
Explains the Fres-Q cursor calculation for contactless measurement of resonance frequency and quality factor.
Covers automatic calculation of Phase Margin, Gain Margin, and Vector Stability Margin.
Provides steps to diagnose and resolve issues related to connecting the Bode 100 and starting measurements.
Offers guidance on troubleshooting software crashes or unexpected behavior and contacting support.
To Next Page
