8 Measurement types and applications
Bode 100 allows measuring Gain as well as Impedance, Reflection and Admittance. The following
chapters introduce you to the basics of the Gain and Impedance / Reflection / Admittance
measurements.
For an easy use, the Bode Analyzer Suite supports different measurement types / modes for different
applications. The available measurements are listed in the start screen of the Bode Analyzer Suite
(see 7.1 Start screen on page 19).
The available measurement modes are grouped in the Vector Network Analysis Tab and the
Impedance Analysis Tab:
Vector Network Analysis
The Vector Network Analysis Tab contains the following measurement types:
1. Transmission / Reflection
2. Gain / Phase
3. Reflection with external coupler
Impedance Analysis
The Impedance Analysis Tab contains the following measurement types:
1. One-Port
2. Impedance Adapter
3. Shunt-Thru
4. Shunt-Thru with series resistance
5. Series-Thru
6. Voltage / Current
7. External Bridge
In the following chapters all measurement types are explained in detail.
36
OMICRON Lab
To Next Page
Loading...
