EasyManua.ls Logo

Omicron Lab Bode 100 - Ribbon Controls

Omicron Lab Bode 100
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7.2.3 Ribbon controls
The Bode Analyzer Suite ribbons feature the following commands:
Home ribbon
• New: Create a new measurement
• Open: Open a different measurement file
• Save: Save the current file
• Save as: Choose a different file name to save file
• Export: Export measurement data
• Report: Create a PDF print-report
A detailed explanation on the single file operations can be found
in 11.1 Exporting and saving measurement data or settings on
page 109.
• Continuous: Starts a continuous measurement
• Single: Performs one single measurement
• Stop: Stops a running measurement
• Transmission/Gain: Open the hardware setup used for the gain
measurement
• Impedance/Reflection: Open the hardware setup used for the
impedance measurement
For more information regarding the hardware setup, please check
out Hardware setup .
• Full-Range: Perform a Full-Range calibration
• User-Range: Perform a User-Range calibration
For more information regarding the calibration, please check out
10 Calibration / Correction on page 85
• Port-extension or port shifting can be used to mathematically
move the reference plane in a reflection measurement. For
more information, please check out: Port extension.
Measurement ribbon
• Store the current measurement data to a new or existing
memory trace.
• Show all available memory traces in the diagram.
• Hide all available memory traces. They will not be shown in the
diagram.
• Delete all memory traces.
26
OMICRON Lab

Table of Contents