8.5 Advanced
8.5.1 SCPI server
The SCPI Server mode allows you to start a localhost SCPI server that offers you an SCPI interface to
control the Bode 100.
The SCPI localhost server allows you to control the Bode 100 via SCPI commands. Please note that
BAS 3.25 is a first experimental version that does not offer any GUI related features. You can only
access functions that are also available via the Bode Automation Interface. This means that you can
configure measurements, execute them and receive single-trace, single-channel data that you can
then further process in your software application. For more information on the SCPI interface and the
Bode Automation Interface, please refer to 12 Automating measurements on page 154.
72
OMICRON Lab
To Next Page
Loading...
