8.2 Impedance measurement introduction
Bode 100 offers several ways of measuring Impedance, Reflection or Admittance. Impedance,
Reflection and Admittance are directly related to each other by the following equations:
Admittance Y is the reciprocal of the impedance Z.
The reflection coefficient Γ is calculated from the measured
impedance Z and the nominal impedance Z
0
.
Z
0
can be changed by the user in the measurement configuration. The nominal impedance
Z
0
field is only visible if a measurement trace is set to Reflection.
The Impedance Analysis modes allow you to display the measurement results in various formats. You
can select the result formats by clicking the drop down Format in the trace configuration box.
Depending on the chosen measurement the following result formats are available:
Measurement types and applications
OMICRON Lab
39
To Next Page
Loading...
