Copy trace data to the clipboard
Right-click either in the chart or directly on the trace name to copy the measured data to the clipboard.
Copied data can directly be pasted in a spreadsheet program for further
data processing or can be pasted as a memory trace into another instance / measurement of Bode
Analyzer Suite.
To move data from one measurement file to another, you can also use drag & drop by
grabbing a memory or measurement trace at the dotted area in the trace header.
You can configure the decimal separator and the field separator under Options →
Clipboard.
Copy settings to the clipboard
Right-click in the chart and select . This will copy a text block to the
clipboard that contains the current equipment settings. The text block is similar to the settings header
included in the CSV or Excel file export.
11.1.3 Use the clipboard to import data
You can use the clipboard to import data into a measurement file. There are two possible sources for
the data:
1. A measurement trace or memory trace from another .bode3 file / Bode Analyzer Suite.
2. User-specific data from a spreadsheet program.
In any case, the data will be imported as a memory trace inside the Bode Analyzer Suite.
Paste trace data from another .bode3 file / Bode Analyzer Suite
Before you can paste data from another .bode3 file, you must copy the data into the clipboard. Right-
click the trace you want to copy, use and select the corresponding trace.
You can only paste single traces. If you use "Copy all traces" you cannot paste the data into
another file.
Bode Analyzer Suite software features
OMICRON Lab
111
To Next Page
Loading...
