7.3 Chart context menu
By right clicking into the chart you get access to a context menu that allows quick access to several
functions:
Reset Zoom: Resets the x-axis to the start and
stop frequency and the y-axes to the predefined
Ymin and Ymax values. See 11.2.2 Zooming the
measurement curve on page 119 for details.
Optimize: Optimizes the Ymin and Ymax values
once to ensure that the current measurement
curve fills the chart area in an optimum way.
Auto Optimize: Optimizes the Ymin and
Ymax values continuously to ensure that the
measurement curve always fills the chart area in
an optimum way.
Reset Axes: Resets the Y-axes to their pre-
defined startup values.
See 11.2.3 Optimize the axis scaling / autoscale
on page 122 for detail on these functions.
Copy image to clipboard: Copies a image of the
current chart to the clipboard.
Copy data to clipboard: Copies all
measurement points of Trace 1 or Trace 2 to the
clipboard for further processing in a spreadsheet
software.
Copy settings to clipboard: Copies all
measurement settings to the clipboard in text
format.
See 11.1.2 Use the clipboard functions to export
data on page 109 for details on these functions.
Cursor 1 & Cursor 2: Allows to access several
cursor functions to position the cursors to the
maximum, minimum or zero crossing of the
measurement traces.
See 11.3 Working with cursors and the cursor
table on page 125 for details on these functions.
30
OMICRON Lab
To Next Page
Loading...
