Use the context menu to:
• Rename the trace
• Change the trace style (color, line style, trace markers)
• Copy the trace data to the clipboard
Collapse the configuration box if you have too many traces and
need more space.
Click on the bin icon to delete the corresponding trace.
Note: This will also remove the corresponding chart axis or chart!
Click, hold mouse and drag to re-order the traces at the right-
hand side of the Bode Analyzer Suite window.
This will also re-order the corresponding axis and diagrams.
Use drag and drop to move the measurement trace data from
one measurement into another.
11.5.1 Measurement traces
In the following the settings that are specific to a Measurement trace are described. The
Measurement trace configuration box is shown in the figure below. It allows you to configure what
measurement is performed and how the measurement results are displayed.
Measurement Configure what measurement the trace performs. Depending
on the measurement mode you can select between Gain,
Impedance, Reflection and Admittance. If a measurement mode
allows only one specific measurement (Gain), the selection will
be disabled.
Use the eye icon to hide the measurement data in a chart.
Note: If you disable the a trace using the checkbox, the
corresponding axis or chart will be removed as well.
Bode Analyzer Suite software features
OMICRON Lab
135
To Next Page
Loading...
