The Start screen allows the following user interactions:
• Choose the device to use (1.). This field is only visible if you have a Bode 100 device connected to
your PC.
• Open a recent file or other file (2.). On your first start-up the demo-files are listed here. Check out
the examples that explain the content of the demo-files.
• Select one of the available measurement modes (3.) and start a measurement.
Hint: If you prefer to automatically start a measurement instead of entering the Start screen,
choose your default startup measurement mode by clicking on Set default startup and
choosing your preferred startup mode. You can also choose a .bode3 file to be your default
startup configuration.
7.2 Main window
After starting a measurement the Main window of the Bode Analyzer Suite is opened.
Figure 7-2: Bode Analyzer Suite Main window.
20
OMICRON Lab
To Next Page
Loading...
