7.2.2 Trace configuration
In a Frequency Sweep measurement, the right hand side of the Bode Analyzer Suite shows the Trace
configuration. The Trace configuration allows to choose what measurement (Gain, Impedance,
Reflection, Admittance) is performed and how it is displayed in the chart.
Trace configuration box: The Trace configuration box displays the trace-name
and allows to configure:
Use the checkbox to the left of the trace name to disable
the trace (including the corresponding axis / chart).
Click
to hide the measurement curve of Trace 1
without deactivating the corresponding axis and Memory
traces.
Click to delete Trace 1.
Click and hold to drag the trace to re-order traces &
charts or to move the data from one file to another.
Measurement: Impedance, defines that Trace 1
measures & displays impedance.
Format: Magnitude, defines that Trace 1 displays the
Magnitude of Impedance.
Ymax: 100 Ω, The upper limit of the y-axis displayed in
the diagram.
Ymin: 1 mΩ, The lower limit of the y-axis displayed in
the diagram.
Y-axis scale : Log(Y), Currently the y-axis is set to a
logarithmic scaling.
Learn more about the trace configuration box in
11.5 Working with measurement and math traces on
page 134.
Memory configuration box: The memory configuration box allows to control the
memory curves:
Use the checkbox to the left of the memory name to
disable (hide) the memory trace.
Click to copy the current measurement data to
Memory 1.
Click to delete the Memory 1 trace.
Click to link the cursors to Memory 1.
Click
and hold to drag the memory trace for re-
ordering of the traces or to move the data from one file
to another.
Furthermore it can be selected via the "Show with"
checkbox in which diagram the memory data is shown.
Learn more about the memory curves in 11.4 Using the
memory traces on page 130.
24
OMICRON Lab
To Next Page
Loading...
