7 Bode Analyzer Suite introduction
In this section you will learn the basics of the Bode Analyzer Suite 3.25. The window structure and the
main functionality is explained.
Step-by-step examples
Get a quick introduction to the Bode Analyzer Suite and how to use Bode 100 by following
the step-by-step examples. The following examples are available in this manual:
• Perform a Transmission / Reflection measurement on the IF filter DUT,
see Transmission / Reflection measurement example on page 45.
• Perform a one-port impedance measurement on the Quartz filter DUT,
see One-Port measurement example on page 53.
• Measure impedance of an inductor using the impedance adapter,
see Impedance Adapter example on page 62.
7.1
Start screen
When starting the Bode Analyzer Suite, the Start screen is shown.
Figure 7-1: Bode Analyzer Suite Start screen.
Bode Analyzer Suite introduction
OMICRON Lab
19
To Next Page
Loading...
