Typical applications
Typical applications for the Transmission / Reflection measurement mode are:
• Measuring Transmission and Reflection of filters such as IF filters or EMI filters.
• Comparing results from measurements with internal and external reference connection (the
Transmission / Reflection measurement mode is the only measurement mode that allows changing
the Receiver 1 connection).
• Measuring Gain of RF amplifiers in the 50 Ω domain.
Transmission / Reflection measurement example
Follow the steps described below to perform a Transmission / Reflection measurement:
Connect the test object "IF Filter" to Bode 100 using two BNC cables as shown in the figure below.
Figure 8-1: Connecting the test object IF Filter to Bode 100
Measurement types and applications
OMICRON Lab
45
To Next Page
Loading...
