11.2 Using the interactive chart
The interactive chart region of the Bode Analyzer Suite offers many useful functions to analyze
measurement results and how to display them in an optimum way. In the following sections the most
important features are presented.
11.2.1 Configure the diagrams
A normal diagram with frequency on the x-axis can have up to two y-axes. This allows to display two
measurement traces in one diagram as shown in the figure below:
Figure 11-1: Two measurement traces in one diagram using two axis (left and right)
It is not always possible to display two traces in one diagram. If one of the two traces is set
to a Polar, Smith, Nyquist or Nichols diagram, automatically two diagrams will be displayed.
Bode Analyzer Suite software features
OMICRON Lab
117
To Next Page
Loading...
