• Add measurement: Adds a new Measurement trace.
• Add math: Adds a new Math trace for basic operations (+-*/).
• Add expression: Adds a new Expression trace for advanced
mathematical operations.
Each trace comes with it's own axis. A maximum of 2
axes can be combined in one chart using the Auto axis
placement function in the View ribbon. If you prefer to
have only one axis per chart, activate One axis per chart
in the View ribbon.
You can find more information about the use
of Measurement, Math and Expression traces in
11.5 Working with measurement and math traces on
page 134.
Select +1 or -1 to be the instability point or positive feedback point
for the stability margin calculation or the closed-loop gridlines in the
Nichols chart.
View ribbon
• Auto axis placement attempts to show two axes (traces) in one
diagram.
• One axis per chart shows a separate diagram for each trace.
You can find more information in 11.2.1 Configure the
diagrams on page 117. Select your preferred default setting in
the options menu.
• Arrange multiple diagrams side by side.
• Arrange multiple diagrams from top to bottom other.
Activate averaging. More details can be found in 11.8 Averaging on
page 150.
Open a text field to add text notes to the current measurement.
Bode Analyzer Suite introduction
OMICRON Lab
27
To Next Page
Loading...
