Cursor ribbon
Add a cursor or a delta cursor. Each cursor will create a new line in
the cursor table.
Activate a cursor calculation. For more details please check out
cursor calculations.
Activate cursor linking. Cursor linking maintains a constant distance
between two cursors. By moving one cursor, the second one will
follow automatically. Use this feature to e.g. measure the slope at
crossover frequency in a bode plot. You can select either decade
(x10) or octave (x2) or constant linear distance which will maintain
the current frequency delta value.
You can find more information about how to work with cursors in 11.3 Working with cursors and the
cursor table on page 125.
28
OMICRON Lab
To Next Page
Loading...
