75
Operating and Configuring the CT Analyzer
English is contained in the firmware and does not require a user language file.
Refer to the OMICRON website for available languages or ask your distributor
for a special language file.
If the text update process is interrupted or fails, the device displays an error
message and automatically resets the user interface to English when it is
switched on the next time.
Press Abort to return to the tools menu without installing a new language.
5.8.3 Update Firmware
Note: Instead of using the Update Firmware function of the CT Analyzer you
can also use the Firmware Update PC tool contained in the CT Analyzer PC
Toolset. For detailed information, please refer to the help system of the CT
Analyzer PC Toolset.
Using this function you can install new device firmware.
Figure 5-15 File system card for selecting a new firmware file
To perform a firmware update, a corresponding firmware file CTAnalyzer.bin
has to be available in the directory A:\OMICRON\ on the Compact Flash card.
To update the firmware, select the desired firmware file CTAnalyzer.bin using
the cursor keys and press the Update Firmw. soft key.
Note: The firmware update process may take some minutes. If the update
process is interrupted or fails, switch the CT Analyzer off and on again. The
device then tries to perform the firmware update again automatically.
Caution: Only install language files that are included in the package of the
installed firmware version. If you install a language file that does not belong to
the same package, the user interface may become unreadable.
Press the Main soft key in
any test card
Main Menu:
- Tools
Select soft key
Tools Menu:
- Update Firmware
-> File system card
How to get there:
To Next Page
Loading...
