CT Analyzer User Manual
60
5.1.3 Editing a Card
To open the edit mode for a displayed card, press the cursor key. The
card’s tab is then no longer highlighted (see Figure 5-3). Use the cursor keys to
move the cursor and to select the desired edit field. Some edit fields have soft
keys assigned. The soft keys available for an edit field are displayed if the field
is selected.
Figure 5-3 Edit field selected in the CT-Object card
Proceed as follows to edit a card:
1. Select the edit field using the cursor keys.
2. Enter or edit the value or text:
– Select an entry offered by the soft keys (if available)
– or enter the value or text using the keyboard and then press the key
to confirm your input or use the key to leave an edit field without
applying and saving the entry.
3. Leave the edit mode either by moving the cursor to the card’s tab using the
cursor key or by pressing the key. The focus is then set to the
card’s tab again (tab highlighted).
5.2 The Main Menu
The Main Menu can be opened from any test card by pressing the Main soft key.
The items in the list can be selected using the cursor keys. When an
item is selected (highlighted), the soft keys are labeled with the functions
available for this specific item.
Figure 5-4 Main Menu page
Display field
(selection not
possible)
Edit field
Edit field selected
Press the Main soft key in
any test card
-> Main Menu
How to get there:
To Next Page
Loading...
