CT Analyzer User Manual
74
5.8.2 Update Text
Note: Instead of using the Update Text function of the CT Analyzer you can
also use the Firmware Update PC tool contained in the CT Analyzer PC Toolset.
For detailed information, please refer to the help system of the CT Analyzer PC
Toolset.
Using this function you can install a new user interface language file. The new
language installed is then available for selection in the Language page.
Figure 5-14 File system card for selecting a new language file
To install a new language, select the corresponding file CTUser_xxx.bin in the
directory A:\OMICRON\ on the Compact Flash card using the cursor
keys and press the Select soft key.
Update Licenses This function allows to add additional licenses to your
CT Analyzer.
Using the Update License soft key you can read a
license file from the Compact Flash card.
Using the New License soft key you can add new
licenses manually.
For information on how to receive new licenses or a
new license key for additional functions, please contact
your local OMICRON distributor or the OMICRON
support.
Press the Main soft key in
any test card
Main Menu:
- Tools
Select soft key
Tools Menu:
- Update Text
-> File system card
How to get there:
To Next Page
Loading...
