163
Technical Data
10 Technical Data
Guaranteed data are specified for an ambient temperature of 23°C ± 5°
(73°F ± 9°), a power supply of 115/230V
AC
, and after a warm-up time longer
than 15 minutes.
Guaranteed data are valid for the period of one year after factory adjustment.
10.1 Mains Power Supply
10.2 Generator Output
10.3 Measurement Inputs
Mains power supply
Connection Connector according to IEC 60320
Mains voltage 100 - 240V
AC
/ 50/60Hz / 6A
Instead of supplying the CT Analyzer from phase-
neutral (L1-N, A-N), it may also be supplied from
phase-phase (e.g. L1-L2, A-B). However, the
nominal voltage must not exceed 240V
AC
.
Mains fuses 2 x T6AH 250V,
(high-breaking capacity wire fuse 5 x 20mm)
Generator output
Output voltage / current AC: 40V
rms
/ 5A
rms
max.
DC: 120V / 15A max.
Output power 400VA
rms
max.
Measurement input "Sec"
Voltage ranges 0 - 0.3 / 3 / 30 / 300V
AC
(auto ranging)
Accuracy 0.1% (guaranteed)
To Next Page
Loading...
