Omni Cresco User Manual

Press AUT-MAN to access the parameter.
Use JOG + and JOG - to set the parameter value.
Press AUT-MAN to save the new set value.
5 PARAMETERS DESCRIPTIONS
N = Standard
M = Motus
TP = Cresco TP
NAME CYCLE PARAMETERS DESCRIPTION
MIN
MAX
DEF
N
M
N
M
N
M
C1
Low Revolutions
Number of revolutions of the
table, when the wrapping
machine is wrapping the lower
part of the object, requiring
packing (listed).
0 0 10 10 1 1
C2
High Revolutions
Number of revolutions of the
table, when the wrapping
machine is wrapping the upper
part of the object, requiring
packing, after completion of
the “Overflow Delay”. (listed)
0 0 10 10 1 1
C3
Stretch
Film tension during the
playback of a cycle
0 0 100 100 50 50
C4
Rpm Rotation
Standard table rotation speed.
(RPM)
1 1 13 8 11 7
C5
Ascent Speed
Carriage speed in the ascent
stage (Hz)
15 15 80 80 65 50
C6
Descent Speed
Carriage speed in the descent
stage (Hz)
15 15 80 80 65 50
CRESCO UCP REV10 13

Omni Cresco Specifications

General

Brand	Omni
Model	Cresco
Category	Stretch Wrapping Systems
Language	English